MuxLab 3G-SDI/ST2110 over IP Tranceiver, MM
Kuvaus
MuxLab 500767-2110-MM 3G-SDI/ST2110 over IP Uncompressed Gateway Converter supports the ST-2110 AV over IP protocol standard for Broadcast applications. This unit is a Transceiver and can be configured as a Transmitter or Receiver for added flexibility and convenience. The unit allows 3G-SDI equipment to be utilized in a broadcast environment over a network, while extending end point source and sink devices at up to 400m via duplex multimode OM4 fiber with LC connectors at up to 1080p resolution @ 60Hz uncompressed, in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also supported by connecting several units to a 10G Ethernet network. The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management).
- Supports Uncompressed 3G-SDI video up to 1080p @ 60Hz and SMPTE ST-2110 over a 10G Ethernet network
- Supports ST-2022-7 (Class D) Data Link Redundancy
- Extend HDMI over an IP network at up to 400m over duplex OM4 fiber
- Supports 100’s of Transmitters & Receivers depending on network bandwidth
- Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
- Supports two 10G Ethernet ports for redundant audio/video signal transmission
- Supports a 1G Ethernet port for 3rd party unit control
- Audio insert (TX) & audio extract (RX) ports (future use)
- RS232 for remote control of end devices (future use)
- Manage with 3rd party control software platforms supporting a Rest API and NMOS (IS-04 & IS-05)