Neutrik NO2FW-XP opticalCON DRAGONFLY naaras
Kuvaus
NO2FW-XP
Female chassis connector with ruggedized anticorrosive plating, 4 crimp contacts, 1 XB2 feedthrough socket and 1 shell ground contact for SMPTE cable shield. Waterproof acc. to protection class IP68 in mated condition with sealing kit SCXP-F.
The chassis connector acts as a feedthrough allowing simplified installations by connecting a XB2 patch cable on the rear. The chassis cut-out has the same size as common standard broadcast cut-outs and is therefore simple to integrate into existing systems.
Additional dirt and dust protection: SCNO2FW-XP sealing cover.
Features & Benefits
- Suggested OEM equipment connector with common broadcast cut-out
- Designed as feedthrough for easy repair and replacement
- Improved guiding nose for safe and correct connection
- Suitable for indoor (studio) and outdoor (OB-Truck) camera links according to SMPTE Standard
- Ruggedized and dirt protected hybrid feedthrough connection system
- 1 MPO cut-out for XB2 patch cord
- 2 signal contacts
- 2 power contacts
- 1 ground contact
- IP68 in mated condition with SCXP-M
Technical Information
| Product | |
| Title | NO2FW-XP |
| Gender | female |
| Electrical | |
| Contact resistance | < 7 mΩ |
| Insulation resistance | > 10 GΩ (initial) |
| Rated Voltage (Power Contact 2+3) | 230 V AC @50 Hz / 330 V DC 120 V AC @60 Hz / 170 V DC |
| Rated Current (Power Contact 2+3) | 10 A |
| Rated Voltage (Sense Contact 1+4) | 42 V AC / 60 V DC |
| Rated Current (Sense Contact 1+4) | 3 A* |
| *According to IEC 62368-1: For rated current up to 3 A, a nominal cross-sectional area of 0.5 mm2 may be used in some countries provided that the length of the cord does not exceed 2 m. |
| Mechanical | |
| Insertion force | < 45 N |
| Withdrawal force | < 45 N |
| Lifetime | 10'000 mating cycles |
| Locking force | 900 N |
| Locking device | Push-Pull |
| Mounting direction | Front mounting |
| Chassis shape | Common standard Broadcast cut-out |
| Wiresize (power) | max. 16 AWG |
| Wiresize (sense) | max. 24 AWG |
| Material | |
| Contacts | Brass |
| Insert | Polyetherimide and Polycarbonate (PEI+PC) |
| Shell | Zinc diecast and Polyoxymethylen |
| Shell plating | Nickel |
| Environmental | |
| Temperature range | -40 °C to +75 °C |
| Optical | |
| Insertion loss | Typ. 0.6 dB per connection / Max. 1.0 dB per connection |
| Optical connector | XB2 Feedthrough |
